Tuesday, September 28, 2010

GT6 bodywork decisions

In the eighteen months or so the car has been on the road the bodywork has deteriorated quite badly, with signs of rust coming up along the top of the windscreen frame, along the rear wing repair sections and numerous spots of corrosion looking like they might push through the paint. In addition to this, the drivers side sill was not put on correctly, giving poor gaps all around. Oh how I wish I knew more back then when I bought it.






In a bit more detail, the front of the roof has obviously had a fair bit of rust in it, meaning that it has been repaired, but not very neatly with varying thickness's of filler and was not sealed off properly, hence the rust starting to come through again.
Both inner rear wheel arches need replacing and there are dubious quantities in the outer arches.
The top of the windscreen surround looks to have been re-modelled as the curvature has been lost, probably replaced with flat sheet.
Both sills have been fitted too far back, not so much of a problem, but one side was also fitted way out of line of the door, see pic above.
It seems that when the sills and floor was replaced on the drivers side they did not bother to check the door gap, so that side will always be too small.
In addition to this there are numerous small patches of rust starting to bubble up through the paint
If it was just one or two of the above problems I would not have been so concerned, but I am not sure if it would still be economic to try and repair this body. It's not going to fall apart or fail an MOT in the next year or two, but I rather be prepared and catch it before it catches me.

All this makes me want to get one of Graham's T6 bodyshells, but at the moment it would cost too much. So that leaves me with a couple of other options, get another shell, with the risk of finding equally shoddy repairs already carried out on it or get mine repaired. I'm warming to the idea of finding a less molested body to restore and modify myself gradually over the next year or so in readiness to swap over as this will give me the opportunity to do some of my modifications a bit more neatly.


Monday, September 20, 2010

New Airbox

I've picked up the air box for the GT6 as they had finished the TIG welding. Seems they spent quite some time on it with the two long seam welds required and there was very little distortion. The box is held in place with dzus fasteners and seal with a closed foam single sided adhesive strip.



It was a concern that the air inlets might not be big enough, they certainly did not look quite right. The long drag up my favourite hill seemed to confirm my suspicion and it is down on power, so I need to go for larger inlets. I'd really like to go for a pair of 3" (76mm) inlets, but the issue then becomes how to route the two large pipes to the front of the car, a bit more head scratching required here I think.

Friday, September 17, 2010

Castle Combe trackday

So quite a few months ago, June actually, was the Castle Combe trackday, my first time out on track. On the first session time seemed to pass exceeding fast, unlike my driving, but I survived. Through out the day my ability to keep up with the other traffic improved and the car only gave me one problem, a leaky rocker cover gasket, which was soon solved with liberal amount of silicone sealant.
A couple of observations from the day, my 'temporary' throttle cable mount could do with stiffening-up or replacing as despite having little slack in the cable, the mount would bend, giving a delay between pressing on the pedal and the butterflies moving. The standard brakes seem perfectly adequate for my driving on that circuit, so no need to worry there, if anything I needed to brake less into corners and carry more speed through.

The front left tyre seems to have come off the worst, not sure if this is my driving style or just due to the rotation of the circuit.



Other pics nicked from over the internets with appologies to Smithy and RoyBoy



There are more pictures to be seen in my Photobucket account and if you are a Club Triumph member, a better write-up of the event in the latest magazine.